GasMix FW 5 & 6 Panels
For flow rates starting at 100 Nm³/hr
The GasMix FW 5 and 6 panels are built to handle higher flows of gas than previous versions, with flow capabilities starting at 100 Nm³/hr.
Dimensions
800 mm x 800 mm x 300 mm
Weight
55 to 75 kg
Supply Gases
All commonly used industrial gases and some speciality gases
Design Pressure
15 bar g
Outlet Options
Up to 3 mixed gas ratios
Inlet and Outlet Connections
Inlets ½” BSP, outlet G3/4
-
All gas mixing products supplied by BSL Gas Technologies Ltd are produced in accordance with a BS EN 1SO 9001:2015 accredited quality system.
The GasMix FW 5 & 6 Panels
What are the key features?
-
Fully customisable
-
Sized to your application
-
Pre-set and certified for optimal mixed gas configurations
-
Suitable for hazardous and non-hazardous gases
-
Optional flow rate adjustment
-
Self-contained, compact design with a durable stainless steel back-plate
-
Low-pressure outlet gas regulators
-
Gas pressure balancing for constant flow
-
Fully mechanical design
What does it do?
The GasMix FW Panel range works by taking two supply gases from either liquid sources or cylinders, which are then filtered before entering the mixing panel. The panel itself is equipped with several key features to ensure accurate and reliable gas mixing.
First, the gases are fed into the panel where they undergo pressure balancing due to our ultra-precise BSL Mass Flow Control Valves (MFCVs). This process maintains a constant flow of gas by equalising the pressures of the incoming supply gases. This ensures that the mixture ratio remains consistent even if there are fluctuations in supply pressure.
The GasMix FW Panel can be configured to provide either a pre-set mixture determined by the customer or an adjustable mixture. The mechanical nature of the mixing process means that no electrical supply is required, enhancing the reliability and robustness of the panel.
The mixed gas can then be directed to up to three different outlets, depending on your specific needs. These outlets can feed directly into a gas analyser for continuous monitoring of the mixed gas output or straight to the process requiring your mixed gas.
What options are available?
FW5
Inlet Gases:
All common industrial gases
Flow Rate:
200 Nm³/hr
FW6-N
Inlet Gases:
2 / 3 gases – non-oxygen (O₂)
Flow Rate:
250 Nm³/hr
FW6-A
Inlet Gases:
2 / 3 gases – hydrogen (H₂)
Flow Rate:
250 Nm³/hr
FW6-H
Inlet Gases:
2 / 3 gases – non oxygen (O₂)
Flow Rate:
250 Nm³/hr
Related Products
GasMix FW Panel
For flow rates of 25 – 100 Nm³/hr
CF5000 Gas Mixing System
For flows up to 200 Nm³/hr under low-pressure conditions
FR131F & 161F Combination Filters
Dual-stage combination gas filters for hydrocarbon and aerosol removal
GasMix FW Panel
For flow rates of 25 – 100 Nm³/hr
CF5000 Gas Mixing System
For flows up to 200 Nm³/hr under low-pressure conditions
FR131F & 161F Combination Filters
Dual-stage combination gas filters for hydrocarbon and aerosol removal